S
P
E
C
F
I
L
E
PT-
CX200
Ultra Short-Throw DLP
™
Projector
As of November 2012
SFD12M002-1
3 / 1 3
COMPUTER 1 AUDIO IN
COMPUTER 2 AUDIO IN
VIDEO/S-VIDEO AUDIO IN
AUDIO OUT
SERIAL IN
LAN
3D SYNC OUT
Power cord length
Cabinet materials
Dimensions (W × H × D)
Weight
Operation noise
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
4
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Ceiling mount bracket
Bracket assembly
Wall mount bracket
Replacement lamp unit
Replacement filter unit
M3 (L, R) × 1, 0.5 Vrms
M3 (L, R) × 1, 0.5 Vrms
RCA × 2 (L/R × 1), 0.5 Vrms
M3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
RJ-45 × 1, for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
Mini DIN 3-pin × 1, for 3D transmitter connection
3.0 m (9 ft 10 in)
Molded plastic (PC)
321 mm × 178 mm*
3
× 386 mm
(12-5/8 × 7*
3
× 15-3/16 inches)
Approximately 6.2 kg (13.7 lbs)
36 dB (
LAMP POWER
:
NORMAL
), 28 dB (
LAMP POWER
:
ECO
)
0– 40 °C (32–104 °F) up to 1,000 m (3,281 ft) above sea level,
0– 30 °C (32– 86 °F) between 1,000 m and 2,700 m (3,281 ft and
8,858 ft) above sea level.
20%– 80% (no condensation)
3 V DC (R03/LR03/AAA type battery × 2)
Approximately 5 m (16.4 ft) when operated from directly in front of the
signal receptor
52 × 110 × 18 mm (2-1/16 × 4-11/32 × 23/32 inches)
Approx. 67 g (2.4 oz) (including batteries)
Power cord with security lock (× 1) (× 2 for PT-CX200EA)
Wireless remote control unit (× 1)
Batteries for remote control (R03/LR03/AAA type × 2)
Computer cable (for VGA, 1.8 m / 5 ft 11 in) (× 1)
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
ET-PKC100B
ET-PKC100W
ET-LAC100
ET-RFC100
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate. Also, only certain com-
mands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 With legs at shortest position.
*4 Operation range differs depending on environments.