background image

ENGLISH - 

17

Preparation

About Your Projector

Remote control

(1) <AUTO SETUP> Button

Execute the setting of Auto setup in the setting 

menu. (

Æ

page 53)

(2)  Input Selection Buttons: <COMPUTER 1>, 

 <COMPUTER 2>, <HDMI>, <VIDEO>, 

<S-VIDEO>, <COMPONENT>. 

These buttons are used to select the input signal. 

(

Æ

page 33)

(3) ▲▼◄► Buttons, <SELECT> Button

Navigate the MENU display. (

Æ

page 37)

(4) <SCREEN> Button

Select a screen mode. (

Æ

page 49)

(5) <MENU> Button

Open or close the On-Screen Menu. (

Æ

page 37)

(6) <FREEZE> Button

     Pause the projected image and sound tentatively. 

(

Æ

page 34)

(7) <AV MUTE> Button

Temporarily turn off the image on the screen. 

(

Æ

page 35)

(8) <D.ZOOM +/-> Buttons
    

Zoom in and out the images.(

Æ

page 33)

(9) </-> Buttons 

Adjust the volume of the speaker. (

Æ

page 35)

(10) <

> Button

Turn the projector on or off. (

Æ

page 28)

(11) <KEYSTONE> Button

Correct keystone distortion. (

Æ

page 34)

(12) <INFO.> Button

Operate the information function. (

Æ

page 34)

(13) <LAMP> Button

Select a lamp mode. (

Æ

page 35)

(14) <P-TIMER> Button

Operate the P-timer function. (

Æ

page 35)

(15) <3D> Button 
    

Operate the 3D function. (

Æ

page 36)

(16) <IMAGE> Button

Select the image mode. (

Æ

page 35)

(17) <MUTE> Button

Mute the sound. (

Æ

page 36)

(18) Remote control signal emitter

Attention

Do not drop the remote control.

 

z

Avoid contact with liquids.

 

z

Do not attempt to modify or disassemble the remote 

 

z

control.

Note

If there are any obstacles between the remote control 

 

z

and the remote control signal receptor, the remote control 

may not operate correctly.

You can operate the projector by reflecting the remote 

 

z

control signal on the screen. The operating range may 

differ due to the loss of light caused by the properties of 

the screen.

When the remote control signal receptor is lit with a 

 

z

fluorescent light or other strong light source, the projector 

may become inoperative. Set the projector as far from 

the luminous source as possible.

Point the remote control toward the projector (remote 

 

z

control signal receptor) when pressing the buttons. See 

the below figures indicating Maximum operating range for 

the remote control.

16.4’

(5 m)

16.4’

(5 m)

11.5’

(3.5 m)

(1)

(10)

(2)

(4)

(5)

(6)

(8)

(7)

(9)

(17)

(16)

(15)

(14)

(13)

(12)

(11)

(3)

(18)

Summary of Contents for PT-CW230U


















































































Reviews: