Technical Information
70
- ENGLISH
Appendix
Status Read Command
Format
The projector control command is defined as one command line that starts with "CR" and ends with carriage
return.
PC
Projector
Projector
PC
Command
Processing
“C” “R” “0” CR
ACK
CR
(A few ms ~ 5s)
Command
Function
Projector
Return
Projector status
CR0
Status Read
00
Power On
80
Stand-by mode
40
Countdown
20
Cooling down
10
Power Malfunction
28
Cooling down at the temperature anomaly
24
Cooling down at Power Management mode
04
Power Management mode after Cooling down
21
Cooling down after the projector is turned off when the lamps are out.
81
Stand-by mode after Cooling down when the lamp is out.
CR6
Temperature Read
%1 %2
%3
%1 = Temperature at Sensor 1 (˚C)
%2 = Temperature at Sensor 2 (˚C)
%3 = Temperature at Sensor 3 (˚C)
(ex.) %1 = 12.3˚C, %2 = 23.4˚C, %3 = 34.5˚C
--> The projector displays “12.3 23.4 34.5”
( For each sensor, two digit and the tenth place numbers are displayed
with a space between each temperature.)
?
Communication failure
