background image

Read this first!

10 - ENGLISH

Important

 

Information

WARNING:

ACCESSORIES

 

„

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.

Do not use unspecified batteries.

 

z

Do not disassemble dry cell batteries.

 

z

Do not heat the batteries or place them into water or fire.

 

z

Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as 

 

z

necklaces or hairpins.

Do not store batteries together with metallic objects.

 

z

Store the batteries in a plastic bag and keep them away from metallic objects.

 

z

Make sure the polarities (+ and -) are correct when inserting the batteries.

 

z

Do not use a new battery together with an old battery or mix different types of batteries.

 

z

Do not use batteries with the outer cover peeling away or removed.

 

z

If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.

Battery fluid on your skin or clothing could result in skin inflammation or injury.

 

 

z

Rinse with clean water and seek medical advice immediately.

Battery fluid coming in contact with your eyes could result in loss of sight.

 

 

z

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

Lamp replacement

The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will 

result.

The lamp can easily explode if struck against hard objects or dropped.

 

z

Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.

 

 

z

Electric shocks or explosions can result if this is not done.

When replacing the lamp, turn the power off and allow the lamp to cool for at least one hour before 

 

z

handling it otherwise it can cause burns.

Do not allow infants or pets to touch the remote control.

Keep the remote control out of the reach of infants and pets after using it.

 

z

Do not use the supplied power cord with devices other than this projector.

Using the supplied power cord with devices other than this projector may cause short circuits or 

 

z

overheating, and result in electric shock or fire.

Remove the depleted batteries from the remote control promptly.

Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.

 

z

Summary of Contents for PT-AR100EA































































































Reviews: