Settings
PICTURE menu
32 -
E
NGLISH
You can adjust the white balance of the projected image.
Setting range: -6 to +6
You can switch automatic adjustment of the lamp and
the lens iris on/off.
ON
:
Automatic adjustment
OFF
:
No adjustment
You can monitor whether or not the luminance level of
the input signal is in the recommended range by
displaying it in the waveform monitor. If the waveform is
not in the range, adjust it for the best quality. See
“Adjusting the signal condition with a waveform” on
page 24.
1. Press
F
G
to move to the required waveform
style.
2. Press
ENTER
to select.
The
WAVEFORM MONITOR
will be displayed.
See “Adjusting the signal condition with a waveform”
on page 24.
J
MONITOR POSITION
When the
FULL SCAN
is selected, press
F
G
I
H
to adjust the position of the monitor.
See “Adjusting the signal condition with a waveform”
on page 24.
J
AUTO ADJUST
You can switch on/off the automatic adjustment
system in each items.
1. Press
F
G
and select the required item.
2. Press
I
H
and switch on/off.
3. Press
F
G
and select
AUTO
and press
ENTER
.
The confirmation screen will be displayed.
4. Press
I
H
and select
OK
.
5. Press
ENTER
.
You can perform image adjustment in some
PICTURE
menu items while displaying a certain area of the frozen
image in a split window.
Q
SPLIT ADJUST MODE
Select the required split style from
NORMAL
and
REVERSE
in the
SPLIT ADJUST MODE
menu.
NORMAL
REVERSE
COLOUR TEMPERATURE
DYNAMIC IRIS
WAVEFORM MONITOR
More
bluish
Less
bluish
OFF
FULL SCAN(Y)
FULL SCAN(R)
FULL SCAN(G)
FULL SCAN(B)
SINGLE LINE SCAN(Y)
SINGLE LINE SCAN(R)
SINGLE LINE SCAN(G)
SINGLE LINE SCAN(B)
MONITOR POSITION
UPPER LEFT
AUTO ADJUST
Items
Default setting
BLACK LEVEL ADJUST
ON
WHITE LEVEL ADJUST
ON
RGB ADJUST (BLACK)
OFF
RGB ADJUST (WHITE)
OFF
NOTE:
• When the
WAVEFORM MONITOR
is set to
OFF
, the
AUTO ADJUST
is not displayed.
SPLIT ADJUST
