E
NGLISH - 19
Basic O
p
eration
Switching the projector on/off
J
Connecting
1. Make sure the shape of
the mains plug and the
AC IN
connector on the
back of the projector
match, then push the plug all the way in.
2. Connect the mains lead to a mains socket.
J
Disconnecting
1. Make sure the
MAIN POWER
is switched off and
unplug the mains lead from the mains socket.
2. Hold the plug and unplug the mains lead from the
AC IN
connector on the side of the projector.
Mains lead
NOTE:
• Do not use other than the provided mains lead.
• Ensure all the input devices are connected and turned off before connecting the mains lead.
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
POWER indicator
Indicator status
Status
No illumination or flashing
The
MAIN POWER
button is switched off.
Red
Lit
The
MAIN POWER
button is switched on and the projector is in standby.
Green
Flashing
The
POWER
button is switched on and the projector is getting ready to project.
Lit
The projector is ready to project.
Orange
Lit
The
POWER
button is switched off and the projector is cooling the lamp.
Flashing
The
POWER
button is switched on again when cooling the lamp and recovering to
projection mode. Recovery may take a while.
NOTE:
• While the projector is cooling the lamp, do not switch the
MAIN POWER
button off or unplug the mains lead.
• The electric consumption in standby mode is 0.08 W.
POWER
indicator