Panasonic PT- 65WX51E, Service Manual

Page: 13 / 126

- 13 -
Service Manual
F
RAME AND
C
USTOMER
C
ONTROLS
P
ANEL
I
NSTALLATION
Note: Handle the PTV screen by holding it by its frame. Avoid scratching the delicate plastic screen.
Follow the procedure below to assemble the PTV screen and control panels to the cabinet.
1. Hold the screen assembly by its sides. Align
the sides of the PTV screen frame with the
cabinet. Lift and slightly tilt the screen and
place it over the front top edge of the cabinet.
Straighten the screen to a vertical position
and lower it until it locks into place. Screw the bottom edge of the screen frame to the
cabinet with 6 screws as illustrated in Fig .9.
2. Attach the control panel to the cabinet and
PTV screen using 4 screws, as illustrated in
the Fig. 9.
3. Connect the G & K boards cables to the
proper connectors.
Figure 9. Frame and Customer Controls Panel Installation
Control Panel
Control Panel
Screws (6)
Screws (4)
Adhesive
K & G Board connectors
Assy Guides
Front Wood Filler (L)