Panasonic PT-51HX42CF, Service Manual

Page: 24 / 144

- 24 -
Service Manual
1080i Service mode (electronic controls)
Note: Registers marked as FIXED are factory preset,
the default value must not be changed
Important note:
Write down the original values (“b” in the
adjustment mode details, figure 16) for each
address adjustment before modifying values.
Follow the procedure below to access the various
service adjustments. (Same procedures applies to
each section.)
a. Press
CH buttons on the remote control to select any of
the seven service sub adjustment addresses. (“a” in
figure 16)
b. Press
The buttons on the remote control to adjust the
level of the selected service adjustments.
MTS Adjustments Description Default Level New Level
MTSIN INPUT LEVEL N/A
SEPAL LOW LEVEL SEPARATION N/A
SEPAH HIGH LEVEL SEPARATION N/A
CLOCK Adjustments Description Default Level New Level
CLOCK CLOCK N/A
VIDEO Adjustments Description Default Level New Level
COLOR COLOR N/A
TINT TINT N/A
BRIGHT SUB-BRIGHTNESS N/A
CONT SUB-CONTRAST N/A
B-Y_G MAGENTA TINT ADJ N/A
R-Y_A YELLOW TINT ADJ N/A
CUT R RED CUT-OFF N/A
CUT B BLUE CUT-OFF N/A
R DR RED DRIVE N/A
B DR BLUE DRIVE N/A
I ABL ABL N/A
C_OFF COLOR ADJ. CUT-OFF N/A
HDEF Adjustments Description Default Level New Level
H POS HORIZONTAL POSITIONING N/A
H WID HORIZONTAL WIDTH 21
PCC PINCUSHION CORRECTION 09
EWCOR CORNER CORRECTION 07
EWTRA TRAPEZOID 08
HCORR HORIZONTAL CORRECTION 0F