31
Basic Operation
Auto shut off
To extend lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically.
Using the number keys
Example 1: To select channel 125,
fi
rst press the 1 key, then 2, then 5.
When selecting CABLE channels 100 to 125 with the number keys,
fi
rst press the 1 key,
and then enter the remaining two digits.
Example 2: To select channel 12, press the 1 key, then 2. Channel 12 appears momentarily.
Example 3: To select channel 8, press the 8 key. Channel 8 appears momentarily.
2
1
H
C
C
B
A
L
A
M
R
O
N
O
E
R
E
T
S
P
A
S
O
N
O
M
Aspect types
(P. 32)
Receivable
broad cast types
(P. 37)
Channel
Channel
caption
(P. 57)
TV status display
Press the RECALL button,
except when the MENU
screen is dis played, to display
current TV status information.
Projection display operation
Projection display Channel up/down
buttons can also be used to select an
out side input as shown right.
* No input mode is displayed for terminals with
no equipment con nect ed.
Using projection display Channel up/down buttons to select input mode
CH 125
VIDEO 1 *
VIDEO 2 *
VIDEO 3 *
COMPONENT 1 *
COMPONENT 2 *
DIGITAL IN
RGB 2
RGB 1
COMPONENT 4 *
COMPONENT 3 *
CH 01
FREEZE
Invalid operation noti
fi
cation
If an invalid operation is attempted, the mark shown right is
displayed.
Example: Invalid operation was tried
during FREEZE mode.
or
CABLE
125
TV
69
