![background image](http://html1.mh-extra.com/html/panasonic/pressit-ty-sb01wp/pressit-ty-sb01wp_operating-instructions-manual_3860595008.webp)
8
English
Transmitter Extension Method (Pairing)
Pairing by connecting the receiver board
and transmitter
1
Slide the mode switch to the STD side.
2
Connect the USB terminal of the transmitter
to the USB terminal of the receiver board.
TY-WPB1
TY-WPBC1
To connect the TY-WPBC1,
use the conversion adaptor
for pairing supplied with
the TY-WP2BC1/TY-
WPBC1.
Wait for a while until the FUNCTION LED of the
receiver board blinks in white. Then, pairing starts
automatically.
“Pairing…” (pairing in progress) is displayed on the
standby screen.
3
Pairing is complete.
“Pairing OK
” is displayed and the FUNCTION LED of
the receiver board lights up in white.
Pairing...
Pairing OK
4
Remove the USB cable of the transmitter
from the receiver board.