5
English
Installtion of the receiver board
The installation instruction below is based on the flat
panel display SQ1 series as an example.
For attaching or removing this product to or from the flat
panel display unit, it is recommended to ask a qualified
technician or sales dealer. A malfunction may occur due
to static electricity, etc. Consult the sales dealer.
Follow the steps below.
Note
•Be sure to turn off the display unit and connected
devices, remove the power plug from the socket, and
disconnect the cables from the display.
•When attaching/removing the receiver board, do not allow
the metal to damage the back cover or display label.
1
Remove the 2 screws, and then remove
the slot cover or receiver board from the
display unit.
To remove the receiver board, hold the handle of
the receiver board and pull it out slowly in the arrow
direction.
2
Insert the receiver board to the main unit
slot, and tighten the 2 screws.
Fix the receiver board with the 2 screws removed in
step 1.
●
Tightening torque guideline: 0.5 N·m or less
Note
•When replacing another receiver board with this
product, the customer shall keep the replaced receiver
board for future repair or servicing.