Panasonic PressIT TY-SB01WP Operating Instructions Manual Download Page 23

23

English

Panasonic System Solutions Company of North America 

Division of Panasonic Corporation of North America   

Two Riverfront Plaza   

Newark, NJ 07102 

 

PANASONIC PROFESSIONAL DISPLAY 

Limited Warranty   

Panasonic System Solutions Company of North America 

(referred to as “the Panasonic ”) will repair the Professional 

Video product (the “Product”) and its accessories as defined 

in the attached table, with new or refurbished parts, free of 

charge in the continental USA, during the applicable 

warranty coverage period from the original date of purchase 

in the event of a defect in materials or workmanship as 

follows: On-Site, carry-in, or mail-in service within the 

continental USA

 may be obtained during the warranty 

period by contacting Panasonic’s Technical Support Center 

at the following toll free number 

855-772-8324

 or via 

e-mail; [email protected]. In case of mail-in service the customer is responsible for the cost of delivering of the

Product to Panasonic’s facility, while Panasonic will pay for the return transportation of the repaired Product to the customer. For out of

warranty Product units submitted for repairs or for in warranty units submitted by customers outside of the continental USA, shipping

arrangements and cost (both ways) are the customer’s responsibility.

Panasonic will also not be responsible for any costs associated with determining the source of system problems or for removing and

installing the faulty Product.

This warranty is extended only to the original purchaser and is nontransferable. A purchase receipt or other proof of date of original 

purchase will be required before warranty service is rendered. Whenever the date of original purchase cannot be satisfactorily 

determined, the date of manufacture of the unit will be deemed to be the effective date of the warranty. Panasonic reserves the right to 

audit and reject any warranty claim that cannot be substantiated. This warranty only covers failures due to defects in materials or 

workmanship which occur during normal use of the Product.     

The warranty 

DOES NOT

 cover damage to the display and its components which occur in shipping; failures which are caused by 

products not supplied by Panasonic; failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, 

modification, faulty installation, setup adjustments, improper antenna, inadequate signal pickup, maladjustment of user controls, 

improper operation, power line surge, improper voltage supply, lightning damage, smoke or chemical vapors contamination, air 

conditioning, humidity control  or other environmental conditions; failure to maintain the product in accordance with the applicable 

Operating Instructions; service by anyone other than an authorized repair facility; damage that is attributable to acts of violence, war, 

acts of God or force majeure

The warranty does not cover damage which occurs to the display or its components caused by excessive continual usage which goes 

beyond the operational time described in the Operating Instructions.   

The warranty does not cover units of which the model and serial number label has been defaced, modified, tampered with or removed. 

The warranty does not cover consumable parts.

 

LIMITS AND EXCLUSIONS 

PANASONIC SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR 

SPECIAL  DAMAGES,  INCLUDING,  BUT  NOT  LIMITED  TO,  LOSS  OF  DATA,  LOSS  OF  PROFIT,  LOSS  OF 

REVENUE, OR LOSS OF BUSINESS OR GOODWILL, SUFFERED BY ANY PERSON, AND RESULTING FROM 

THE USE OF THIS PANASONIC PROFESSIONAL DISPLAY PRODUCT, OR ARISING OUT OF ANY BREACH 

OF  THIS  WARRANTY.  ALL  EXPRESS  WARRANTIES  SPECIFIED  ABOVE  ARE  IN  LIEU  OF  ALL  OTHER 

WARRANTIES,  EXPRESS,  IMPLIED  OR  STATUTORY,  INCLUDING  BUT  NOT  LIMITED  TO,  THE  IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an 

implied warranty lasts, so the above limitations or exclusions may not apply to you. 

If you have a problem with this product that is not handled to your satisfaction, then write the Consumer Affairs Department at the Panasonic’s 

address indicated above.

 

Models or Parts 

Part Warranty 

Labor 

Warranty 

All Professional Display 

Model 

3 Years 

3 Years 

    Exceptions 

All Panasonic accessories: 

e.g. mounting kit, input

signal module, cables,

remote control, filter,

batteries. 

1 Year 

1 Year 

Summary of Contents for PressIT TY-SB01WP


























Reviews: