Panasonic PN88162C-ID Installation Manual Download Page 1

Page: 1 / 15



Thank you for purchasing our product.



This manual provides important information about safe and proper
operations of this Ethernet Switch.



Please read the

"Important Safety Instructions" on pages 3 to 5



Any problems or damages resulting from disassembly of this Ethernet Switch
by customers are not covered by the warranty.

C0917-20122

ZEQUO 5410DL

Model No.

Installation Guide

Printed in Japan

PN88162C-TH

PN88162C-MY

PN88162C-ID

PN88162C-SG

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022



The instruction manuals (CLI Version), latest firmware and
SDN application (ZEQUO assist Plus) can be downloaded
from the following URL.
https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

Summary of Contents for PN88162C-ID
















Search results

Summary of Contents for PN88162C-ID

Reviews:

Related manuals for PN88162C-ID

Brands by name

Popular brands

Panasonic PN88162C-ID, Installation Manual

Search results

Summary of Contents for PN88162C-ID

Reviews:

Related manuals for PN88162C-ID

Brands by name

Popular brands