3
MODULE SPECIFICATIONS
Module specifications are shown in
Table 1-1, 1-2 and Figure 1-1, 1-1-a,
1-1-b, 1-2. (Electrical specifications,
mechanical specifications, module
dimensions)
1)
Rated electrical characteristics are
within the range of +10% to –0% of
the values measured at Standard
Test Conditions (STC). Irradiance of
1000W/m
2
, 25
±
2
℃
cell tempera-
ture, AM1.5 and solar spectral irra-
diance according to IEC 60904-3.
2)
Under normal conditions, a module
may experience conditions that
produce more current and/or volt-
age than reported at standard com-
ponent test conditions. Accordingly,
the values of Isc and Voc should be
multiplied by a factor of 1.25 when
determining voltage ratings, con-
ductor capacities, fuse sizes, and
size of controls connected to the
module output.
3)
The current output for the modules
shown in the Specifications is meas-
ured at Standard Test Conditions.
These conditions may not be fre-
quently observed in actual practice.
Table 1-1. Model Specifications
Silicone hetero-junction*: Mono-crystalline Silicon/amorphous silicon hetero-junction
Model
VBHN240SJ25
VBHN245SJ25
VBHN250SJ25
Maximum Power (Pmax)
+
10/-0 %
W
240
245
250
Open Circuit Voltage (Voc)
±
10 %
V
52.4
53.0
53.2
Short Circuit Voltage (Isc)
≧
90 %
A
5.85
5.86
6.03
Maximum Power Voltage (Vpm)
V
43.6
44.3
44.3
Maximum Power Current (Ipm)
A
5.51
5.54
5.65
Cell Number in Series
pcs
72
Cell Type
Silicon hetero-junction*
Maximum System Voltage (Vsys)
V
1000
Maximum over-current protection rating
A
15
Factory Installed Bypass Diode
pcs
43
Length x Width x Height
mm
1580 x 798 x 35
Weight
kg
15
