262
UF-9000
APR 2006
Ver. 3.0
DP-180/190
(23) Install the
Rear Paper Tray Cover
.
<Installing the Hole Cover>
(24) Turn the Power Switch on the Left Side of the
machine to the OFF position.
(25) Open the
ADF
and observe the position of the
Hole Cover through the Platen Glass, to facilitate
installation.
(26) Install the
Hole Cover
.
(27) Turn the
Hole Cover
counterclockwise by
pushing from the bottom and ensure that it is
positioned as illustrated.
Note:
If the Hole Cover position is incorrectly positioned,
the scanner will not work properly.
(28) Turn the Power Switch on the Left Side of the
machine to the ON position, and reconfirm that
the Scanner still moves freely.
(29) Load paper into the Paper Tray.
Caution:
Make sure that the paper is set under the Ribs and
that it does not exceed the Max. Level Indicator.
You can load up to 250 sheets (20 lb / 75
g
/m
2
).
(30) Make a copy on the Platen to ensure the
machine works properly.
Summary of Contents for Panafax UF-9000
