PAN1322-SPP
ENW89841A3KF
User’s Manual
32
Revision 1.3, 2013-08-14
Hardware Description
Bluetooth Qualification and Regulatory Certification
ENW89841A3KF is intended to be installed inside end user equipment. ENW89841A3KF is Bluetoooth-qualified
and also FCC-certified and Industry Canada approved, and conforms to R&TTE (European) requirements and
directives with the reference design described in
Manufacturers of mobile, fixed or portable devices incorporating this device are advised to clarify any regulatory
questions and to have their complete product tested and approved for compliance (FCC or other when applicable).
When using other antennas, a “class II permissive change” is required for FCC approval. The normal procedure
is to first provide a technical test report showing that 4 dBi is not exceeded and to continue working with a
regulatory test house to finalize the approval for a new antenna implementation.
There are no parts in ENW89841A3KF that can be modified by the user except modifications of the device BD
data and loading of SW patches. Any changes or modifications made to this device that are not expressly
approved by Panasonic, may void the user’s authority to operate the equipment.
9.2
FCC Class B Digital Devices Regulatory Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by 1 or more of the following measures:
•
Reorient or relocate the antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio or television technician for help
9.3
FCC Wireless Notice
This product emits radio frequency energy, but the radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human
contact with the antenna during normal operation is minimized.
To meet the FCC's RF exposure rules and regulations:
•
The system antenna used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
•
The system antenna used for this module must not exceed 4 dBi.
•
Users and installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance, please refer to
