With a PC
59
LSQT1091
≥
The indication [Enhanced Host Controller] is
changed as [EHCI] depending on the host
controller you use.
4
Click [Driver] tab to check the description
on [Driver Provider].
≥
If [Microsoft] is displayed on [Driver Provider],
the confirmation procedure is completed.
If a description other than [Microsoft] is
displayed
≥
Update the driver with the following procedure.
1
Click [Update Driver...].
2
Check [Install from a list or specific location
(Advanced)] and then click [Next].
≥
When your OS is Windows 2000, click [Next]
after [Update Device Driver Wizard] appears.
3
(For Windows XP Users)
Check [Don’t search. I will choose the driver
to install] and then click [Next].
(For Windows 2000 Users)
Check [Display a list of the known drivers
for this device so that I can choose a
specific driver] and then click [Next].
4
Click [Standard Universal PCI to USB Host
Controller] and then click [Next].
5
Click [Finish].
≥
The update of the driver is completed.
Connect the Camcorder.
Connecting the Camcorder to a personal
computer
1
Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
2
Set [BASIC] or [ADVANCED] >>
[USB FUNCTION] >> [MOTION DV].
3
Connect the Camcorder to the personal
computer with USB cable.
4
Select [start] >> [All Programs (Programs)]
>> [Panasonic] >> [Quick Movie Magic 1.0E]
or [MotionDV STUDIO 5.6E LE for DV] >>
[Quick Movie Magic] or
[MotionDV STUDIO LE for DV].
≥
Using the MotionDV STUDIO for Windows, a
variety of visual effects can be added and titles
can be created.
≥
You cannot record a video edited by the PC
onto the tape in the Camcorder.
≥
When 2 or more USB devices are connected to
a personal computer or when devices are
connected through USB hubs or by using
extension cables, proper operation is not
guaranteed.
≥
When connected to the keyboard USB terminal,
normal function may not be possible.
LSQT1091_ENG.book 59 ページ 2006年11月27日 月曜日 午後1時17分