Record mode
35
LSQT1091
Tele macro function
By focusing only on the subject and blurring the
background, the image can be impressive. This
Camcorder can focus on the subject at a distance
of approx. 50 cm (20 inches).
≥
Set to Tape/Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon
1
appears.
2
Move the joystick right to select the
tele-macro icon [
].
≥
The [TELE MACRO ON] indication appears
on the screen of the Camcorder.
≥
If the magnification is 10
k
or less, then it is
automatically set to 10
k
.
ª
To cancel the tele macro function
Select the [
] icon again.
≥
The [TELE MACRO OFF] indication appears on
the screen of the Camcorder.
≥
If a sharper focus cannot be achieved, adjust
the focus manually.
≥
In the following cases, the tele macro function is
canceled.
≥
The zoom magnification becomes lower than
10
k
.
≥
The power is off or the mode dial is operated.
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥
Set to Tape Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon
1
appears.
2
Move the joystick left to select the fade icon
[
].
≥
The [FADE ON] indication appears on the
screen of the Camcorder.
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio
disappears completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [
] icon again.
≥
The [FADE OFF] indication appears on the
screen of the Camcorder.
1
B
1
LSQT1091_ENG.book 35 ページ ２００６年１１月２７日 月曜日 午後１時１７分
