Record mode
31
LSQT1091
ASPECT [4:3]:
: 1280
k
960
: 640
k
480
Recording still pictures onto a card
(Photoshot)
≥
Set to Card Recording Mode.
1
Press the Photoshot button
[
] halfway in
order to adjust focusing.
(For auto focusing only)
≥
If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([
(MEGA Optical image stabilizer)] will
be indicated.)
≥
The iris/gain value is fixed and this
Camcorder focuses on the subject
automatically.
1
Shutter chance mark
±
(The white lamp flashes.):
Focusing
¥
(The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful
≥
The shutter chance mark is indicated as
follows when the Photoshot button [
] is not
pressed halfway. Please use it as a guide for
recording.
¥
(The green lamp lights up.):
When in focus and a good picture
can be recorded
±
(The white lamp lights up.):
Almost in focus
2
Focus area
2
Press the Photoshot button [
] fully.
ª
To record still pictures clearly
≥
When zooming in on the subject with a
magnification of
4
k
or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥
When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
≥
You can record stable pictures without shaking
by using a tripod and the remote control.
≥
For the number of still pictures that can be
recorded on a card, refer to
-78-
.
≥
Moving pictures and sound cannot be recorded
onto a card.
≥
While data is being recorded on a card, do not
operate the mode dial.
≥
When the access lamp is lit, do not remove the
card.
≥
Another product may degrade or not play back
data recorded on this Camcorder.
≥
If you set [PICT.QUALITY] >> [
], mosaic-
pattern noise may appear on a playback image
depending on the picture content.
≥
When the [PICTURE SIZE] is set to other than
[
] or [
], the mega pixel recording mode
is set.
≥
It is not possible to press the [PHOTO SHOT]
button on the remote control halfway.
ª
On-screen display in the card
recording mode
1) Still picture size
2) Card indication (
-66-
)
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
ª
Select the size of still pictures to be
recorded on a card
1
Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
ASPECT [16:9]:
:2048
k
1152
:640
k
360
ASPECT [4:3]:
1
M
0.3
M
MEGA
1
2
0.2
0.3
M
100
100
1)
3)
4)
2.4
2)
2.4
0.2
LSQT1091_ENG.book 31 ページ ２００６年１１月２７日 月曜日 午後１時１７分
