Panasonic P2HD AG-HPG20 Page 12 Operating Instructions Manual Download

Page: 12 / 120

How to use the unit

Housed in a compact cabinet which can be battery-powered, this Memory Card Portable Recorder is

a compact recording/playback unit coming with two P2 card slots, a 3.5-inch LCD monitor, USB 2.0,

IEEE1394, composite signal, SDI and many other input/output signal connectors. It can be easily operated

to play back the data content which has been shot by a P2 camera recorder. It is also capable of backup

recording and file management, and it supports outdoor field recording.

Playing back data content on the P card

Playing back the data on the unit’s LCD

monitor (Page 5)

Data content (both pictures and sound) which has been shot on P2 cards using a P2 camera recorder can
be played back on the spot.

Outputting the data to the external monitor

for playback (Page 6)

The data content (both pictures and sound) on P2 cards can be output to the external monitor, and played back.

Recording data on P cards

1 connection (Page 6)

You can record data on P2 cards by connecting the unit to the external devices equipped with 1394

(DVCPRO/DV stream) output, such as a P2 camera recorder. The unit’s recording start and stop

operations can be performed from some camera recorders.

Recording in AVC-Intra100 and AVC-Intra50 modes is not possible with 1394 input.

•

P camera recorder

AG-HPG20

P card

AG-HPG0 (this unit)

HD/SD-SDI output

Video output/Audio

output

AG-HPG20

1 cable

P camera recorder

P card

External monitor

AG-HPG0 (this unit)

P card

Use VIDEO/SDI/1394 output for monitoring purpose in other modes than playback mode. It is not

suitable for recording purpose because Pictures/Sound/Time cord (TC/UB) may become incorrect.

If the content on the P2 card has been recorded in DVCPRO HD, DVCPRO50, DVCPRO25 or DV

format, signals are also output from DVCPRO/DV input/output connector (IEEE1394).

(AVC-Intra100 and AVC-Intra50 do not support 1394 output)

•

Summary of Contents for P2HD AG-HPG20

























































































































Search results

Summary of Contents for P2HD AG-HPG20

Reviews:

Related manuals for P2HD AG-HPG20

Brands by name

Popular brands

Panasonic P2HD AG-HPG20, Operating Instructions Manual

Search results

Summary of Contents for P2HD AG-HPG20

Reviews:

Related manuals for P2HD AG-HPG20

Brands by name

Popular brands