Operating Instructions
116
3.1.6
Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is
clicked.
1.
Click [Reset to Factory Default] on the Maintenance page.
2.
Click [Execute].
•
The indicator blinks orange, and then turns off for 10 seconds.
•
All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.
•
If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing
Installation/Troubleshooting.
Notes
•
The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 62). Set it again.
•
See page 123—page 130 for default settings.
•
Pressing the FACTORY DEFAULT RESET button resets the camera to the
factory default (see page 121).
•
All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card
are not deleted.
•
The reset operation takes about 1 minute.
•
Do not turn off the camera during the reset operation.
Summary of Contents for OneHome BB-HCM331A
Page 146: ...Operating Instructions 146 ...
Page 147: ...Operating Instructions 147 Index ...
