Panasonic Omnivision PV-V4600 Service Manual Download

Page: 23 / 139

Fig. D4

C. Install the Mechanism Chassis and Cassette Up Ass'y straight

onto the Main C.B.A. so that the Sensor LED clears the hole in
the Mechanism Chassis and that 5 Connectors (P6201, P6202,
P3551, P4001,and P4451) are aligned and seated securely.

5. Installation of Cassette Up Ass'y

A. Confirm that the Locking Tab (L-7) under the Cassette Up Ass'y

is in Hole on the Mechanism Chassis when installing the
Cassette Up Ass'y. Then, slide the Cassette UpAss'y towards the
back.

B. When installing 2 Screws (S-9), slide the Holder Unit (Refer to "

METHOD FOR LOADING/UNLOADING OF MECHANISM

" in

SERVICE NOTES) to tighten screws.Then, slide it back to the
EJECTPosition.

C. Hook Spring (P-1) to the Drive Rack Arm on the Mechanism

Chassis.

5.2. MECHANISM SECTION

5.2.1. Disassembly/Reassembly Method

Summary of Contents for Omnivision PV-V4600












































































































































Search results

Summary of Contents for Omnivision PV-V4600

Reviews:

Related manuals for Omnivision PV-V4600

Brands by name

Popular brands

Panasonic Omnivision PV-V4600, Service Manual

Search results

Summary of Contents for Omnivision PV-V4600

Reviews:

Related manuals for Omnivision PV-V4600

Brands by name

Popular brands