Panasonic OCU-R200SF, Service Manual

Page: 6 / 52

Do not touch electrical components with wet hand.
Check the installation platform periodically.
Do not climb or put other objects on the unit. Do not operate the unit when the service valve is closed.
Consult professionals when disposing of the unit. Recover all the refrigerant before disposal.
6
When removing the fin guard of the condenser,do not touch the
fin.
A spark from switches may lead to ignition, thus
catching fire. Touching the fin and sliding along the fin may cause
skin cut by the fin edge.
The refrigerant in the unit must be recovered. The
release of refrigerant into the air will pollute the
environment. Consult with professionals for recycle or
disposal.
Safety Precautions
Operating Precautions
Disposal
Do not touch the high temperature parts of unit with hand.
Check the operation of earth leakage breaker periodically.
Page
Use of a defective earth leakage breaker will disable the
safety shutdown, which may cause electrical shock or
fire. The use of a deteriorated platform may lead to the
collapse or fall of the unit, thus causing injury.
Climbing or placing objects on the unit may result in the
collapse or fall of the unit, thus causing injury. Operating while closing the high pressure service valve
leads the abnormal high pressure. It may cause the
explosion.
Take care of the liquid refrigerant when open the refrigerant
cycle. Turn off the power supply when conducting maintenance
and inspection.
Applying current when doing the cleaning or carrying
out maintenance and inspection may cause electrical
shock, injury, or burn. The refrigerant will spray out when opening the service
valve. The refrigerant may generate toxic gases when it
contacts flames.
Do not handle switches with wet hand. Otherwise, it
may cause the electrical shock. Because of the high temperature, Touch with compressor
or discharge piping will hurt your hand.
If the unit is disposed of while it is still filled
with refrigerant and oil, the unit may cause fire
and explosion.
Do not use a flammable aerosol spray near the unit or do not put
combustible materials near the unit.
Make it sure to follow