Panasonic NV-VP31GL, Manual

Page: 13 / 194

Since the resistance at pin 2 of IC6001 decides the model distinction, there is no need to set up
the Model code, which is necessary in the previous models.
STEP4.LINE-IN SETTING & ACTIVATE PLUG-IN A.T.P.
(FOR OTHER THAN NV-VP31GL)
1. Press the Channel up and down keys simultaneously for more
than 3 seconds until the channel on the unit’s display changes to
1, under the condition of the no tape is in the unit.
2. Confirm that "A1" and "A2" can be displayed on the FIP by
pressing the CH UP and CH DOWN buttons.
3. Disconnect the AC plug for few seconds and connect it again, and
press POWER button for turning the power to on from off to carry
out the "Plug in Auto Tuner Preset".
4. Since other than the channels that can be stored by "Auto
Tuning" operation are not available yet, preset manually by
consulting the note of its available TV channels of which you took
before.
STEP5.TAPE INTERCHANGEABILITY ADJUSTMENT
Refer to the Electrical Adjustment Procedures.
6.3. CAUTION FOR AC MAINS LEAD (NV-VP31GC)
6.4. HOW TO REPLACE THE LITHIUM BATTERY
6.4.1. GENERAL DESCRIPTION
There is a RAM in the IC6001, which is backing up the following data by using the power source
of B7751 (Back-up Battery) and C7752 (Back-up Capacitor: Back-up time is approximately 30
minutes).
1. Programme Navigation Data
2. TV Tuning Data
3. PG Shifter Adjustment Data
4. Option Setting Data
13