8
CH 2
END: MENU
CH 2
SEARCH 74
END: MENU
SEARCH
On Screen Display
CH2
AFC: OK
FINE
:
END: MENU
Manual Tuning Procedure
1
Press the MENU button
U
to display the Main menu on
the TV screen.
2
Press the Cursor buttons (
34
)
S
to select [TUNER
PRESET] then press OK button
T
.
3
Press the Cursor buttons (
34
)
S
to select [CH] then
select the channel number you want tuned by pressing
the Cursor buttons (
21
)
S
.
4
Confirm that [CLEAR] is set to [OFF].
5
Press the Cursor buttons (
34
)
S
to select [AUDIO
SYSTEM] then select the broadcasting system by
pressing the Cursor buttons (
21
)
S
.
– BG:
PAL B.G.H/SECAM B.G
– I:
PAL I
– DK:
PAL D/SECAM D.K.K1
– M:
NTSC
6
Press the Cursor buttons (
34
)
S
to select [COLOUR
SYSTEM] then select [AUTO] by pressing the Cursor
buttons (
21
)
S
.
– The VCR automatically distinguishes between PAL,
SECAM and NTSC broadcasts.
– If the picture lacks colour when [AUTO] is selected,
select [MESECAM], [PAL] or [NTSC].
7
Press the Cursor buttons (
34
)
S
to select [SEARCH]
then press the Cursor buttons (
21
)
S
to start the
Manual Tuning.
– If the desired TV station has not been tuned, press the
Cursor buttons (
21
)
S
again.
– Press the MENU button
U
and repeat steps
3
–
7
for
each programme position you want to tune to a station.
8
Press the MENU button
U
three times to exit the On
Screen Display.
Direct Tuning
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4
Confirm that [CLEAR] is set to [OFF].
5
Press the Cursor buttons (
34
)
S
to select [SEARCH].
6
Press the Numeric buttons
2
to enter the number of the
desired programme position.
– For other channels that require tuning, repeat
steps
3
–
6
.
7
Press the MENU button
U
twice to exit the On Screen
Display.
Fine Tuning Procedure
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4
Press the Cursor buttons (
34
)
S
to select [FINE] then
press the Cursor buttons (
21
)
S
to obtain the best
tuning condition.
– Press the OK button
T
to return the tuning to its former
state.
5
Press the MENU button
U
to exit
the On Screen Display.
Blanking of Unused Programme Positions
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4
Press the Cursor buttons (
34
)
S
to select [CLEAR] then
press the Cursor buttons (
21
)
S
to select [ON].
– Repeat steps
3
–
4
for other unused programme
positions to skip during the selection of programme
positions.
– To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5
Press the MENU button
U
twice to exit the On Screen
Display.