39
Adv
anced Oper
ations
Audio Dubbing on a Panasonic Hi-Fi VCR
General
≥
The VHS format allows audio dubbing only on the normal (mono) audio track, as the Hi-Fi audio tracks cannot be
re-recorded without erasing the video signal.
A. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound Alone
1
Press the INPUT SELECT button
3
to select the AV input terminal to which the audio dubbing source unit is
connected.
2
Press the Play button
I
to search for the tape position at which the audio dubbing is to start.
3
Press the AUDIO button
?
repeatedly until the “– –” indication appears.
≥
The normal audio track is now selected.
4
Press the Pause/Still button
i
at this position.
5
Press the A.DUB button
c
to switch the VCR over to the audio dubbing mode.
6
Press the Pause/Still button
i
to start audio dubbing.
7
After audio dubbing has been completed, rewind the tape, play it back and make sure that the normal audio track is
selected (see step
3
above).
8
Check if the audio dubbing was performed to your satisfaction.
B. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound and
Original Hi-Fi Sound Together (Hi-Fi Mix Function)
1
Press the INPUT SELECT button
3
to select the AV input terminal to which the audio dubbing source unit is
connected.
2
Press the Play button
I
to search for the tape position at which the audio dubbing is to start.
3
Press the AUDIO button
?
repeatedly until the “L R” indication appears.
≥
The Hi-Fi audio tracks are now selected.
4
Press the Pause/Still button
i
at this position.
5
Press the A.DUB button
c
to switch the VCR over to the audio dubbing mode.
6
Press the Pause/Still button
i
to start audio dubbing.
7
After audio dubbing has been completed, rewind the tape, play it back and set “Audio mode” to “MIX”.
(For details, refer to page 56.)
8
Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).
C. Externally Mixing the Sound from the Hi-Fi Tracks with the New Sound for Audio
Dubbing and then Playing It Back
(To produce audio-dubbed tapes for playback on mono VCRs)
1
Press the INPUT SELECT button
3
to select the AV input terminal to which the audio dubbing source unit is
connected.
2
Press the Play button
I
to search for the tape position at which the audio dubbing is to start.
3
Press the AUDIO button
?
repeatedly until the “L R” indication appears.
4
Press the Pause/Still button
i
at this position.
5
Press the A.DUB button
c
to switch the VCR over to the audio dubbing mode.
≥
Input both the original signals of the Hi-Fi tracks (from the AV1, AV2 or the Audio Output sockets) and the new
sound into a mixing console (optional), and then input the mixed sound back into the VCR for audio dubbing.
6
Press the Pause/Still button
i
to start audio dubbing.
7
After audio dubbing has been completed, rewind the tape, play it back and press the AUDIO button
?
repeatedly until
the “– –” indication appears.
≥
The normal audio track is now selected.
8
Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).
