Panasonic NV-GX7B, Operating Instructions Manual, Page: 40 / 52

Others
-40-
≥
When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON] or the Colour Night View Mode is
set, the digital modes of [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu cannot be used. (
-38-
)
≥
Setting the Cinema Mode cancels the Picture-in Picture
Mode and the Multi-Picture Mode.
In the following cases, using the Digital Effect Function
is not possible.
≥
Card Mode
≥
Title In
It is as follows when [GAINUP] is selected.
≥
Manual Focus Mode
≥
The shutter speed and White Balance cannot be operated.
≥
The Sports Mode [
5
], the Portrait Mode [
7
] and Low
Light Mode [
4
] are cancelled.
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥
Use the Camera Search Function
≥
Press the [STILL] Button
Picture-in-Picture Mode
≥
If the [OFF/ON/MODE] Switch is operated, the smaller
picture disappears.
≥
Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥
If the [MULTI] Button is pressed while self-recording Mirror
Mode (
-14-
) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
≥
Multi-Picture Mode cannot be used in digital still picture
mode.
≥
The quality of Multi images deteriorates slightly.
≥
The top and bottom of the Multi pictures will be cut off
slightly.
ª
Playing Back
Repeat Playback
If you continue to press the [
1
] Button for 5 seconds or
longer, the Movie Camera switches to Repeat Playback
Mode, and the [R
!
] Indication appears. (To cancel Repeat
Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Listening to Playback Sound through Headphones
If you want to use the headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Socket (
-5-
) on the Movie Camera. In this
case, no sound (including a warning sound and shutter
sound) will be reproduced through the built-in speaker of the
Movie Camera.
≥
When connecting the headphones with remote controller to
the [PHONES] Socket, the Movie Camera may cause the
mis-operation.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and sub sound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥
If you dub a tape recorded at the [12bit] selected as the
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu,
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].
ª
Index Search Functions
≥
Index Search may not be possible at the beginning of tape.
≥
Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
≥
Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª
Playback Zoom Function
≥
You cannot adjust the sound volume with the Remote
Controller in Playback Zoom Mode.
≥
If you turn off the Movie Camera power or if you switch from
VCR Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥
Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal (
-6-
) or Digital Still
Picture Terminal (
-27-
) are not enlarged.
≥
As you enlarge an image, the quality of image suffers.
≥
During a Playback Zoom, the Variable Speed Search
Function cannot be changed with the Remote Controller.
ª
Playback Digital Effect Functions
≥
Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal (
-6-
) or
Digital Still Picture Terminal (
-27-
).
≥
You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape.
Multi-Picture Mode (VCR Mode)
≥
The quality of Multi images deteriorates slightly.
≥
Playback Multi-Mode screens cannot be output through the
DV Terminal (
-6-
) or Digital Still Picture Terminal (
-27-
).
≥
If there is input from DV Terminal, a multi screen cannot be
created.
≥
When signals are input from S-Video Input/Output Socket
or Audio-Video Input/Output Socket, a Multi Screen cannot
be re-displayed.
≥
Signals input from S-Video Input/Output Socket or
Audio-Video Input/Output Socket cannot be displayed on a
Multi Screen.
≥
If you switch the Movie Camera from the Index
Multi-Picture Mode over to the Camera Mode, the setting of
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
ª
Playing Back on Your TV
≥
If you set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [IN/OUT], nothing will be shown on the TV
screen except during playback.
ª
Audio Dubbing
≥
The blank section of a tape cannot be dubbed.
≥
Sounds sent through the DV Terminal cannot be dubbed.
≥
If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥
If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible to
use the Memory Stop Function (
-47-
), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥
In the case of importing data recorded with Audio Dubbing
to a PC using the PC’s software programme, only the
original sound (ST1) may be imported, depending on the
software programme.
ª Recording the Contents of Other Equipment
Recording to a Card
If you set the [TAPE/CARD/CARD MODE] Selector to
[CARD], you can use the Card Photoshot function for
external input signals.
≥
Black streaks may appear at the 4 edges of the image.
≥
When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
≥
If the [TAPE/CARD/CARD MODE] Selector is set to
[VOICE], recording to a Card is not possible.
MJ147‑B.book 40 ページ ２００２年４月２日 火曜日 午後１０時５分