Panasonic NV-GX7B, Operating Instructions Manual, Page: 14 / 52

Camera Mode
-14-
Camera Mode
Recording
When recording with the [AUTO/MNL/FOCUS] Switch
(50)
set to [AUTO], the Movie Camera automatically adjust the
focus and white balance. In some cases, they cannot be
adjusted automatically and need to be adjusted manually.
(
-18-
,
-19-
)
1
Set the [OFF/ON/MODE] Switch (28) to [ON].
≥
The [CAMERA] Lamp
(27)
lights up.
2
Set the [TAPE/CARD/CARD MODE] Selector (4) to
[TAPE].
3
Press the Recording Start/Stop Button (26) .
≥
Recording starts.
≥
After the [RECORD] is displayed, it changes to [REC].
ª Recording Lamp (Tally Lamp)
The Recording Lamp
(38)
lights up during recording and
alerts those being recorded that recording is in progress.
≥
The Recording Lamp does not light up if the [REC LAMP]
on the [OTHER FUNCTIONS] Sub-Menu is set to [OFF].
ª
To Pause the Recording
Press the Recording Start/Stop Button (26) again.
The [PAUSE] Indication is displayed.
≥
If the Recording Pause Mode continues for more than
6 minutes, the power is turned off automatically for tape
protection and power conservation. To resume recording
from this condition, turn off, then turn on the power again.
AUT
O
MNL
FOCUS
(50)
OF
F O
N MODE
CAMERA
VCR
CARD
P.B
(28)
(27)
TAPE CARD
CARD MODE
(4)
RECORD
REC (26)
(38)
PAUSE
PAUSE
ª To Check the Recording
By pressing the [
S
] Button (9) briefly in the Recording
Pause Mode, you can play back the last few seconds of the
recorded scene.
≥
The [CHK] Indication is displayed. After checking, the
Movie Camera resumes the Recording Pause Mode.
ª To View the Recorded Scene while the
Recording Is Paused (Camera Search)
The recorded scene can be viewed by keep pressing the
[SEARCH
j
] Button
(9)
or [SEARCH
i
] Button
(12)
in the
Recording Pause Mode.
≥
When the [SEARCH
j
] Button is pressed, images are
played back in the reverse direction.
≥
When the [SEARCH
i
] Button is pressed, images are
played back in the forward direction.
ª Recording Yourself
By opening the LCD Monitor and rotating it frontward (to the
lens side), you can let the subject in front of the Movie
Camera monitor the shot while recording is in progress.
≥
When the LCD Monitor is opened, the Viewfinder is
disabled automatically. However, when the LCD Monitor is
rotated frontward, the image is also shown in the
Viewfinder.
≥
If you prefer to have the image on the LCD Monitor to look
like an image in a mirror, set [SELFSHOOT] on the
[OTHER FUNCTIONS] Sub-Menu to [MIRROR]. Images
are recorded normally and no left and right reversal occurs.
≥
If [MIRROR] is used during self-recording, only the basic
indications, such as the Recording Indication [
] (Red) or
[
¥
], Recording Pause Indication [ ] (Cyan) or [
¥;
] and
Remaining Battery Power Indication [
x
], are displayed.
≥
If a general Warning/Alarm Indication [
°
] appears, return
the LCD Monitor to the original position in order to check
the specific content of the Warning/Alarm Indication.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch
(28)
to [OFF].
≥
For other notes concerning this item, see
-38-
.
Quick Start
By pressing the [QUICK START] Button
(25)
, and the Movie
Camera will be ready for recording in approximately
1.5 seconds after the Movie Camera is turned on.
1
Press the [QUICK START] Button (25) .
≥
The Quick Start Recording Lamp
(24)
lights up.
SEARCH
(9)
SEARCH
SEARCH
(9)
(12)
START
QUICK
OF
F O
N MODE
(24)
(25)
MJ147‑B.book 14 ページ ２００２年４月２日 火曜日 午後１０時５分