Panasonic NV-GX7B, Operating Instructions Manual, Page: 26 / 52

VCR Mode
-26-
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
2
Continuing the aforesaid setup, select [A.DUB INPUT]
>> [MIC] or [AV IN].
≥
Set to [AV IN] when external device is used, and to [MIC]
when an external or built-in microphone is used.
≥
Switch the Movie Camera over to the Still Playback
Mode where you want to add new sound.
3
Press the [A.DUB] Button (60) on the Remote
Controller.
4
To start Audio Dubbing, press the [
;
] Button (74) on
the Remote Controller.
To Cancel Audio Dubbing
Press the [
;
] Button (74) on the Remote Controller.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio
Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio Dubbing.
MIX: It plays back both the original sound and the sound
added by Audio Dubbing simultaneously.
≥
For other notes concerning this item, see
-40-
.
Copying on an S-VHS (or a VHS) Cassette
(Dubbing)
After connecting the Movie Camera and the VCR as
illustrated, start the following procedures.
1
AV Cable
2 S-Video Cable (not supplied)
PUSH
W.B/SHUTTER/IRIS/
MF/VOL/JOG
M ENU
(21)
(19)
INDEX INDEX
SELECT
STOP
K L
∫
V /REW
STILL ADV
T
W
s
VO
L
r ¥
REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/ W
STILL ADV
6 1 5
;
E D
(60)
(74)
21-pin Adaptor
1 2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
S-VIDEO
IN/OUT
AV IN/OUT
PHONES/
REMOTE
≥
If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
≥
Be sure to press the [OSD] Button (
-6-
) on the Remote
Controller prior to copying so that no indications are visible.
Otherwise, the displayed tape counter and function
indications are also copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an erasure
prevention tab.
≥
If various setups (such as external input, tape speed,
etc.) are required, please refer to the operating
instructions of your VCR.
Movie Camera:
3
Press the [
1
] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop recording.
Movie Camera:
6
Press the [
∫
] Button to stop playback.
Recording the Contents of Other Equipment
After connecting the Movie Camera and the other
equipment as illustrated, start the following procedures.
1
AV Cable
2 S-Video Cable (not supplied)
≥
If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
Movie Camera:
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
2
Insert an unrecorded Cassette.
Other Equipment:
3
Insert a recorded Cassette and start playback.
21-pin Adaptor
1 2
[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
S-VIDEO
IN/OUT
AV IN/OUT
PHONES/
REMOTE
PUSH
W.B/SHUTTER/IRIS/
MF/VOL/JOG
M ENU
(21)
(19)
MJ147‑B.book 26 ページ ２００２年４月２日 火曜日 午後１０時５分