Others
119
LSQT1123
Card
1: Recorded pictures are not clear.
• Have you set [BASIC] >> [PICT. QUALITY] >>
[
]? If recording is done with it set to [
],
pictures with fine details may include a
mosaic-like pattern. Set [PICT. QUALITY] >>
[
]. (
-88-
)
2: A file recorded on a card cannot be deleted.
• Is the file protected? Protected files cannot be
deleted. (
-102-
)
• For the SD Card, if its write protect switch is set
to [LOCK], then deletion is disabled. (
-77-
)
3: Photoshot playback images do not look
normal.
• The picture may be damaged. In order to
prevent the loss of image data, backing up on a
cassette or a personal computer is
recommended.
4: Even if a card is formatted, it cannot be
used.
• Either the movie camera or the card may be
damaged. Please consult a dealer. Use an SD
card from 8 MB to 4 GB with this unit.
5: During playback, [UNPLAYABLE CARD] is
displayed.
• The image was either recorded in a different
format, or data is damaged.
6: If the SD card is inserted in another device,
it is not recognized.
• Check that the device is compatible with the
capacity or type of SD card (SD Memory Card/
SDHC Memory Card) that you inserted. (
-77-
)
Refer to the operating instructions of the device
for details.
Others
1: The indication disappears, the screen is
frozen, or no operation can be performed.
• Turn off the power to the movie camera. If the
power cannot be turned off, press the [RESET]
button, or detach the battery or the AC adaptor
and then reattach it. After that, turn on the
power again. If normal operation is still not
restored, detach the power connected, and
consult the dealer who you purchased the
movie camera from.
2: “PUSH THE RESET SWITCH” is displayed.
• An irregularity in the movie camera has been
automatically detected. Remove the cassette
or the card for data protection and then press
the [RESET] button with the boss
A
. The
movie camera will be activated.
• If you do not press the [RESET] button, the
power to the movie camera is turned off
automatically about 1 minute later.
• Even after you press the [RESET] button, the
indication may still appear repeatedly. If so, the
movie camera needs repair. Detach the power
connected, and consult the dealer who you
purchased the movie camera from. Do not
attempt to repair the appliance by yourself.
3: When the USB cable is disconnected, an
error message will appear on PC.
• To disconnect the USB cable safely, double-
click the [
] icon in the task tray and follow the
instructions on the screen.
4: The warning/alarm indication [
°
] appears
when the camera is operated in the WEB
camera mode.
• Did you press the menu button or the recording
start/stop button? You cannot use the menu or
record onto the tape/card in the WEB camera
mode.
• Is the setting for the remote control correct?
• Did you attempt to play a tape without inserting
it? Insert a tape.
• Did you attempt to play a tape with copyright
protection (copy guard)? Pictures of the tape
with copyright protection (copy guard) cannot
be displayed on the PC. (The audio of the tape
can be played.)
A
RESET
LSQT1123_ENG.book 119 ページ 2006年12月25日 月曜日 午前9時45分