Record mode
36
VQT0T39
Image stabilizer function
Reduces the image shaking due to hand
movement when recording.
≥
Set to Tape/Card Recording Mode.
1
Set [ADVANCED] >> [O.I.S.] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCED] >> [O.I.S.] >> [OFF].
≥
When recording still pictures in the Card
Recording mode, pressing the [PHOTO SHOT]
button halfway increases the effect of the image
stabilizer function. (MEGA OIS)
≥
When a tripod is used, we recommend that you
turn the image stabilizer off.
≥
In the following cases, the image stabilizer
function may not work effectively.
≥
When the digital zoom is used
≥
When a conversion lens is used
≥
When the camera is shaken greatly
≥
When you record a moving subject while
tracking it
Continuous Photoshot
Records still pictures continuously at a certain
interval.
≥
Set to Card Recording Mode.
1
Set
[BASIC] >> [PICTURE SIZE] >> [
] or
[
].
2
Set
[ADVANCED] >> [BURST MODE] >>
[ON].
3
Press and hold the
[PHOTO SHOT] button.
ª
To stop continuous photoshot
midway through
Release the [PHOTO SHOT] button.
≥
You can press the [PHOTO SHOT] button
halfway and then start continuous photoshot.
(Focusing is fixed. If the image stabilizer
function is turned on, then MEGA OIS will be
activated.)
≥
The camera records up to 10 still pictures at
intervals of 0.7 seconds.
≥
One more still picture may be recorded after you
release the [PHOTO SHOT] button.
≥
This is not mega pixel still-picture recording.
≥
The video flash is not used.
≥
If the self-timer is set, the camera records up to
10 still pictures continuously.
≥
Intervals between recording pictures may
become longer depending on the card. We
recommend using a Panasonic SD Memory
Card.
≥
When using the card formatted by other
equipment or a card that was recorded and
erased repeatedly, the intervals between
recording pictures may become longer. If so,
back up your important data on a PC, and
format your card with this movie camera.
0.2
0.3
M
PHOTO SHOT
VQT0T39_EP_eng.book 36 ページ ２００５年１２月２６日 月曜日 午後８時７分
