Record mode
40
VQT0T39
≥
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
≥
During normal playback, image movement may
not look smooth.
≥
When recording in the extremely bright place,
the colour of the screen may change or flickers.
If so adjust the shutter speed manually to 1/50
or 1/100.
Manual iris/gain adjustment
≥
Set the shutter speed before setting the
aperture (iris/gain) when manually adjusting
both settings.
≥
If the value does not become “OPEN”, you
cannot adjust the gain value.
≥
If the gain value is increased, the noise on the
screen increases.
≥
Depending on the zoom magnification, there are
iris values that are not displayed.
ª
Shutter speed range
1/50 to 1/8000 seconds: Tape Recording Mode
1/2 to 1/2000 seconds:
Card Recording Mode
The shutter speed closer to 1/8000 is faster.
ª
Iris/gain value range
CLOSE (Closed), F16, ..., F1.7,
OPEN (Opened: F1.6) 0dB, ..., 18dB
Value closer to [CLOSE] darken the image.
Value closer to [18dB] brighten the image.
Values with dB are gain values.
ª
Card slow shutter mode
≥
If the shutter speed is set to 1/2, 1/3, 1/6, or
1/12, then the card slow shutter mode will be
activated.
≥
If the power is off or the mode dial is operated,
then the slow shutter mode will be cancelled.
≥
In the slow shutter mode:
≥
The white balance is fixed.
≥
Focus in manually.
≥
If the [AUTO/MANUAL/FOCUS] switch is set to
[FOCUS], then the shutter speed will
automatically be set to 1/50 and the subject is
focused in on. After that the previous shutter
speed will be restored. When the subject is
focused on, [MF] flashes.
≥
If the scene is low in brightness or contrast, the
subject may not be focused in on.
≥
While the movie camera is focusing on the
subject, you cannot operate any control on it
with the exception of [OFF/ON] switch, mode
dial, [AUTO/MANUAL/FOCUS] switch and
[POWER LCD] button.
MF
VQT0T39_EP_eng.book 40 ページ ２００５年１２月２６日 月曜日 午後８時７分