Edit mode
37
LSQT0893
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
1
, high-image-
quality dubbing can be done in digital format.
≥
Set to Tape Playback Mode.
(Player/recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
≥
You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
¥
/
;
] icon.
Or, while pressing the [
¥
REC] button on the
remote control, press the [
1
] button.
5
Move the joystick up to select the [
¥
/
;
]
icon again or press the [
;
] button on the
remote control to stop recording.
(Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the camera is standby for recording, move
the joystick down and select the [
∫
] icon.
≥
Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥
If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
≥
Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥
Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥
The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥
If a picture containing a copyright protection
signal (copy guard) is recorded by the movie
camera, the picture is distorted by mosaic-like
patterns at playback.
≥
Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
≥
When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
≥
While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joy stick.
1
STOP
V
/REW
STILL ADV
VOL
¥
REC
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
T
W
GS35_25GN.book 37 ページ ２００５年１月３１日 月曜日 午後３時２５分
