Panasonic NV-FJ730B Operating Instructions Manual Download Page 24

Page: 24 / 48

Other Timer Recordings and Convenient Functions

Setting the Recording Date/Day(s)

Press the [DATE] button to select the recording date (1 to 31), daily timer
recording date (Su-Sa, Mo-Sa or Mo-Fr) or weekly timer recording date
(Su to Sa) in operation step 3 (see page 22) when programming a timer
recording with the On Screen Display, or in operation step 4 (see page 23)
when programming with the VIDEO Plus+ Code.
•

Programming a timer recording (setting the date) is possible up to one month
ahead of the TV programme’s broadcasting date and time. Daily and weekly timer
recordings will continue until you cancel them.

Ensuring that a TV Programme Will Be Recorded until Its End (Auto SP/LP Change Function)

If the VCR determines that the remaining tape time is insufficient to record the whole programme, LP mode is automatically
selected to ensure that the programme will be recorded as long as possible.

Press the [SP/LP/EP] button to select [A] in operation step 6
(see page 22) when programming a timer recording with the On Screen
Display, or in operation step 4 (see page 23) when programming with
the VIDEO Plus+ Code.
•

This function cannot change the recording speed to the EP mode.

•

If the remaining tape time is still not sufficient even in the LP mode, the
programme cannot be recorded to its end.

•

If the recording speed changes from SP to LP during a timer recording, some
brief picture distortion will occur at that point.

PDC Function

PDC stands for Programme Delivery Control.
If a TV programme, for example a football game runs longer than scheduled, is shortened or starts earlier or later, this function
synchronises the recording start and stop with the actual start and stop of the TV programme.

Press the [Cursor] buttons (

3421

) to make the [ON] indication appear in

operation step 7 (see page 22) when programming a timer recording with
the On Screen Display, or in operation step 4 (see page 23) when
programming with the VIDEO Plus+ Code.
Conditions for correct operation of the PDC function:
•

[ON] must be displayed under [PDC] on the On Screen Display.

•

The TV station must broadcast PDC signals.

•

The programme starting time must be set correctly to the starting time listed in the
newspaper/magazine.

To Check, Change or Cancel Timer Recording Programmes

Press the [PROG./CHECK] button to display the timer
recording programmes on the TV screen.

• When the VCR is in the timer recording standby mode for a

PDC recording, the On Screen Display may be distorted.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Press the [Cursor] buttons

to select the

programme that you want to change or cancel and then
press [OK] button.

To change or cancel timer recording programmes, use
the [Cursor] buttons

3421

, the [CH], [DATE], [ON],

[OFF] or [CANCEL] button.

Press the [OK] button to conclude the setting.

Press the [EXIT] button to exit the On Screen Display.

Note:
In the cases, below, the programming of a timer recording remains stored in the memory until 4 a.m. the next day.
However, this is not a malfunction.
• When a timer recording was not completed because there was not enough tape left.
• When you have stopped the timer recording before it had finished.

To Check the Total Timer Recording Programming Time

The total time indication for timer recording programming lets you check how many programmes
can be recorded by comparing it with the remaining tape time in the VCR display.
• The total time is calculated in the SP mode.
• The total time cannot be calculated when setting Daily/Weekly timer recording.

VCR

DATE

CANCEL

AUDIO OSD/DISPLAY RESET

SP/LP/EP

OFF

PROG. / CHECK

TIMER

I-TIMER

DATE

BBC2

27/10