38
Recording Pictures on a Card to a Tape
Card Images can be recorded on the Tape one at a time or all automatically.
After setting to Card Playback Mode, please carry out the following steps.
To Copy 1 Picture
1
Slide the [TAPE/CARD] Selector towards [TAPE].
2
Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].
3
Display a desired picture.
4
Press the [PHOTO SHOT] Button.
≥
During the copying, the Indication
1
appears.
≥
It takes approximately
a few
seconds to record a picture to the Tape.
≥
In the case of recording to tape, select the tape position before recording.
The memory image will be recorded to the tape position where the
[PHOTOSHOT] Button is pressed at step 4.
To Copy All the Pictures
1
1
1
1
Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].
2
2
2
2
Display the first picture.
≥
If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
3
3
3
3
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥
During the copying, the Indication
1
appears.
≥
It takes approximately
a few
seconds for each picture to be
copied
on
the Tape. To stop the copying midway, press the [
∫
] Button.
≥
Moving Picture data and Voice data cannot be recorded from a card to tape.
≥
When pictures with a size other than [640
k
480] are copied onto the
cassette, their picture quality will deteriorate somewhat.
≥
The size of the Picture recorded on a Card to a Tape is [640
k
480].
≥
During recording from Card to Tape an index signal is automatically
recorded.
≥
Regardless of the setting of [P
RESET
] in [SLIDE SHOW], data is recorded
onto the tape from the currently playing back picture to the last picture.
1
NOW RECORDING
REC
4
PHOTO
SHOT
3,
2
,
3
3
3,
2
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
1
2
1
TAPE
CARD
ACCESS
CAMERA
CARD P. B
VCR
RESET
2
,
1
PICTURE MPEG4 VOICE
CARD
MODE
OFF ON
MODE