46
COPY INHIBITED: Because the medium is
protected by a copy guard,
images cannot be recorded
correctly.
CAN NOT CHANGE MODE:
The Mode of the Movie Camera
can not be changed in the PC
connection Mode.
~~~~~~~~~~~~~~~~~
Notes and Hints
ª
Selecting Remote Controller Modes
When 2 Movie Cameras are used simultaneously,
they can be operated individually by selecting
different Remote Controller Modes.
≥
If the Remote Controller Mode of the Movie
Camera and that of the Remote Controller do not
match, [REMOTE] Indication is displayed.
Setup on the Movie Camera:
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-
Menu to the desired Remote Controller Mode.
(
l
Setup on the Remote Controller:
[VCR1]: Press the [
D
] Button and [
∫
] Button
simultaneously.
[VCR2]: Press the [
E
] Button and [
∫
] Button
simultaneously.
≥
When the battery in the Remote Controller is
replaced, the mode is automatically reset to
[VCR1] Mode.
ª
Concerning the Power Supply
≥
When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not a
malfunction.
≥
If the [CHARGE] Lamp does not light up although
the Battery is attached to AC Adaptor, detach the
Battery and reattach it.
≥
Battery CGP-D110 and CGP-D105 cannot be
charged with this AC Adaptor.
ª
Inserting/Removing the Cassette
≥
If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥
When inserting the cassette, make sure it faces in
the right direction and then push it in until it stops.
ª
Alarm Sounds
When [BEEP SOUND] on the [OTHER
FUNCTIONS] Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu is set to [ON],
confirmation/alarm beeps are issued as follows.
1 Beep
≥
When you start recording
≥
When you switch the [VCR/OFF/CAMERA/
M-CARD] Switch from [OFF] to Camera Mode or
Card Recording Mode.
2 Beeps
≥
When you pause recording
10 Beeps
≥
If you perform a wrong operation before or during
recording
ª
Recording
≥
Before turning on the power, remove the Lens
Cap. If the Lens Cap is still attached when the
power is turned on, Automatic White Balance
Adjustment
(
l
may not function correctly.
ª
Recording Check
≥
For Recording Check, the recording speed mode
(SP/LP) must be the same as the mode used for
the recording. If different, playback images will be
distorted.
ª
Photoshot
≥
Photoshot Recording results in slightly inferior
image quality.
ª
Progressive Photoshot Function
≥
The still pictures are recorded at a slightly
rewound point from where you press the
[PHOTOSHOT] Button.
≥
When you change to the Still Picture Mode, you
will hear a click. This is the sound of the iris closing
and not an indication of malfunction.
≥
If you record still pictures in Progressive Photoshot
Mode when your Movie Camera is set to
Programme AE
(
l
, the brightness of the
images may change.
≥
When you set the following functions,
[PROGRESSIVE] will be set to [OFF].
≥
Digital Effect Modes in [EFFECT]
(
l
≥
Digital Zoom [D.ZOOM]
(
l
≥
Image Stabilizer Function [SIS]
(
l
≥
When [PROGRESSIVE] is set to [ON], the shutter
speed cannot be adjusted to 1/750 s or faster.
(
l
ª
Zoom In/Out Functions
≥
When you are zooming on a faraway subject, a
sharper focus is achieved if the recording subject
is 1.7 metres or more away from the Movie
Camera.
A‑ENG.book 46 ページ ２００２年１月２８日 月曜日 午前１１時３２分