3
CONTENTS
Parts Identification ................................................ 2
Contents, Installation ............................................ 3
Safety precautions ................................................ 4
Caution for using .................................................. 6
Temperature control ............................................. 7
Inverter Control Display ........................................ 9
Food Storage, Food storage in the freezer
compartment, How to make ice cubes .............. 10
How to clean the refrigerator ...............................11
Removing trays for cleaning ................................11
Removing the vegetable case and chilled case
for cleaning ........................................................ 12
Removing the bottom freezer case for cleaning ........ 12
Removing shelf egg, shelf bottle and left/right
provision compartment shelf for cleaning ........... 12
Refrigerator instruction guidelines ...................... 13
Troubleshooting .................................................. 13
Specification, Memo .......................................... 14
INSTALLATION
1
2
Grounding
receptacle
Ground
wire
Illustration for the
ground connection
For safety, the ground connection should be done
(
For a refrigerator with plug (2-pin plug) without any ground wire)
The ground connection will allow prevention of danger resulted from electricity leakage.
The ground connection can be performed in 2 ways as follows:
1. In the case that the grounding receptacle having been prepared for
the socket (plug socket), connect the ground wire to the screw used
for ground connection at the bottom rear of the refrigerator (regarding
the screw used for ground connection, please notice the
symbol)
as shown in the illustration
1
.
2. In the case that the socket (plug socket) having not been provided
with any grounding receptacle, connect the ground wire to the screw
at the bottom of the refrigerator, (as regards the screw used for
ground connection, please notice the
symbol). And then connect
the other end to the ground rod as shown in the illustration
2
.
Prohibited spots for ground connection
●
Gas pipes and water supply pipes (dangers from electric shock or
explosion).
●
The ground wires of telephone cords and lightning rods (dangers from lighting).
●
The refrigerator must be located in the place where there is good air circulation.
There must be a space between the top of the refrigerator and the ceiling
at least 30 cm as well as the space between the wall and the back of the
refrigerator at least 10 cm and the side of the refrigerator and the wall at
least 5 cm.
●
Do not locate the refrigerator in the humid
place as rust may form and may cause the electric leakage.
●
Do not locate the refrigerator exposing to direct sunlight as the heat and
sunlight will increase the temperature.
●
When moving or shifting the refrigerator, remove all trays and check
to be sure that there is no water in the refrigerator adjust the leveling
stand of refrigerator, then moving the refrigetator and installation in the
location, adjust leveling stand for locking.
●
In case of locating the refrigerator on an uneven surface, adjust the
leveling stand to make the refrigerator stands stably.
●
If there is no ground wiring plug in refrigerator, it should be connected
with ground connection to prevent hazard from electric leakage.
●
The refrigerator LED lamp, specially designed for this refrigerator, function to not
individual replacing. If you need to replacing, please contact Panasonic Service Center.
Remark
The lamp in vegetable case is flashing LED which have function to keep freshness and
increase vitamin C in vegetable and fruits. If you need to replacing or have problem with
this lamp, please contact Panasonic Service Center.
NR-BY551-BY601-EN(B-1).indd 3
11/4/09 5:10:02 PM
