13
4.2. Test mode list
Phase
Description
Alternate valve postion
Warning lights
1)
TEST MODE BEGINNING:
The door should be closed when the test mode
operates.
2)
TEST MODE BEGINNING
Close the door. After some seconds the machine
starts to fill the water. The cycle could start with
drain.
Upper spray arm
(upper washing, if it is
foreseen)
3)
DETERGENT DISPENSER OPENING
After the pressure switch level has been
reached, the machine ends the filling, the heat-
ing element is activated and the dispenser unit is
being supplied.
Upper basket
4)
HEATING:
The machine starts the heating till reaching 45
. Upper basket 30sec
Lower basket 30sec
5)
HEATING
The machine starts the heating till reaching 50
.
Lower basket
6)
WAITING THE OPERATOR INTERVENTION
(it lasts max 30
)
Once the temperature is reached, the machine
continues to wash. During this phase , the
regeneration coil works ( it lasts max 30 min-
utes). To proceed the mode, you needs to lift the
antiflood safety device (polystyrene) or to press
the program selection button..
Lower basket
7)
FINAL DRAIN
Once the antiflood safety device is activated ,
the machine drains.
(Upper basket)
8)
DOOR OPENING/ WAITING THE OPERATOR
INTERVENTION/TEST MODE END
At the end of the drain phase, the generation
electric valve is activated to open the door (max
3‘). Once the machine is switched off, the test
mode ends. (see point 9). Once the program
selection button is pressed, the automatic test
proceeds (it lasts max 3+15 minutes)
(Upper basket)
9)
AUTOMATIC TEST MODE FOR THE FINAL
LOAD
Once the program button is pressed, the water is
filled in order to start the following automatic test
mode till reaching the pressure switch full condi-
tion (+ 2”)
(Upper basket)
10)
TEST MODE END
Once the final load is done, the display shows as
described on the right. Switch the machine off
and open the door to check the detergent dis-
penser opening. Switch the machine on and ver-
ify that the programs/options warning lights
work.
(Upper basket)
Summary of Contents for NP-B6M1FIGB
