9.6. Stirrer motor
1. Release 1 canoe clip on the cover and then remove the cover.
2. Pull out stirrer.
3. Remove 3 screws which holding exhaust guide A on the oven.
4. Tilt exhaust guide A.
5. Disconnect 2 connectors from stirrer motor.
6. Remove 1 screw holding stirrer motor.
7. Release from retainer tab by turn spinning certain angle, remove
stirrer motor.
9.7. Blower motor (U)
1. Disconnect 1 connector from blower motor (U).
2. Remove 2 screws which holding blower motor (U) on the oven.
3. Remove blower motor (U).
9.8. Fan motor A (for H.V. inverter (U) cooling)
Disassembly procedure step 1~8 same as above H.V. Inverter (U).
9. Pull out fan blade.
10. Remove 2 screws which holding fan motor A on the orifice, and remove fan motor A.
25
Summary of Contents for NN-S262SF APH
