OPERATION
SCROLL DISPLAY
1. Plug the power supply
cord into wall outlet.
BEFORE USE REFER TO
OPERATING
INSTRUCTIONS
2. Press [
Clock
] pad.
3. Enter time of day
(TOD) by pressing
appropriate [
Number
]
pads.
4. Press [
Clock
] pad.
TOD has now been
resistered into the
digital programmer
circuit and will count up
by minutes.
4.2. Time cooking for two stage
OPERATION
SCROLL DISPLAY
1. Place a water load in
the oven.
2. Press [
Power Level
]
pad once to set High
power.
(1st stage)
3. Set for 5 seconds by
pressing [
Number
]
pads.
5 sec.= [5]
4. Press [
Power Level
]
pad 6 times to set
Medium power.
(2nd stage)
5. Set for 1 minute by
pressing [
Number
]
pads.
1 Min.= [1] [0] [0]
9
Summary of Contents for NN-S262SF APH
