4
EN
Important safety instructions
Installation
Examine your microwave oven
Unpack the oven, remove all
packing material, and examine the
oven for any damage such as dents,
broken door latches or cracks in the
door. If you find any damage, notify
your dealer immediately. Do not
install a damaged microwave oven.
Earthing Instructions
IMPORTANT: THIS UNIT HAS TO
BE PROPERLY EARTHED FOR
PERSONAL SAFETY.
If your AC outlet is not earthed, it is
the personal responsibility of the
customer to have it replaced with a
properly earthed wall socket.
Operation Voltage
The voltage has to be the same as
specified on the label on the oven. If a
higher voltage than specified is used,
it may cause a fire or other damages.
Placement of the oven
This appliance is intended to be
used in household and similar
applications such as:
•
staff kitchen areas in shops,
offices and other working
environments;
•
farm houses;
•
by clients in hotels, motels and
other residential environments;
•
bed and breakfast type environments.
1. Place the oven on a flat and
stable surface, more than
85 cm above the floor.
The appliance is freestanding
type and shall not be placed in
a cabinet.
2. When this oven is installed, it
should be easy to isolate the
appliance from the electricity
supply by pulling out the plug or
operating a circuit breaker.
3. For proper operation, ensure a
sufficient air circulation for the
oven.
Counter-top use:
Allow 15 cm of space on the top of
the oven, 10 cm at the back, 5 cm
on one side, and the other side
must be opened more than 40 cm.
10 cm
15 cm
5 cm
open
counter top
4. Do not place this oven near an
electric or gas cooker range.
5. The feet should not be
removed.
6. This oven is only for household
usage. Do not use outdoors.
7. Avoid using the microwave
oven in high humidity.
8. The power cord should not
touch the outside of the oven.
Keep the cord away from hot
surfaces. Do not let the cord
hang over the edge of a table or
work top. Do not immerse the
cord, plug or oven in water.
9. Do not block the air vents. If
these openings are blocked
during operation the oven may
overheat. In this case the oven
is protected by a thermal safety
device and resumes operation
only after cooling down.
10. This appliance is not intended
to be operated by means of an
external timer or separate
remote-control system.
