Panasonic NN-E486MM, Operating Instructions Manual

Page: 18 / 72

16 17
EN
Using the timer
Example: To count 5 minutes.
By using the Timer, you can program Standing Time after cooking is completed or use to program
the oven as a minute timer.
Example: To stand for 5 minutes after cooking at 3 minutes at Medium microwave power.
By using the Timer, you are able to program Delay Start cooking.
Example: To start cooking 5 minutes later at 3 mins. Medium microwave power.
Press 5 times. Set desired amount
of time. (up to 99 min 50 secs)
Press Start. Time will
count down without
the oven operating.
Press once.
Press 3 times.
Set the desired
cooking program.
(See page 14 EN
for instructions.)
Press once.
Press Start.
Cooking starts.
After cooking,
standing time
will count down
without the
oven operating.
Press Start.
Delayed time
will count
down, then
start cooking.
Press 5 times.
Set
the desired amount
of standing time.
(up to 99 min 50
secs)
Press 3 times.
Set the desired
cooking time.
Press 3 times.
Set the desired
cooking time.
Press 5 times. Set
the desired amount
of delay time. (up to
99 min 50 secs)
Press once.
Press 3 times.
Set the desired
cooking program.
(See page 14 EN
for instructions.)
Delay start cooking
Standing time
Kitchen Timer
5 times
3 times
5 times
5 times
3 times
Micro Power
Micro Power
min
10
min
1
sec
10
min
10
min
1
sec
10
min
10
min
1
sec
10
min
10
min
1
sec
10
min
10
min
1
sec
10
„ Notes
1. Multi-stage cooking can be programmed including Delay Start and Standing Time.
2. If the oven door is opened during the Delay Start, Standing Time or Minute Timer,
the time in the display window will continue to count down.
3. Standing Time/Delay Start cannot be programmed before/after an auto program.
4. If the programmed delay time exceeds one hour, the time will count down in units of
minutes. If less than one hour, the time will count down in units of seconds.
Downloaded from www.vandenborre.be