![background image](http://html1.mh-extra.com/html/panasonic/nn-cf874b/nn-cf874b_operating-instruction-and-cook-book_3518388027.webp)
– 25 –
To Cook Food Using
Sensor Reheat/Cook
Sensor Cook/Reheat allows you to cook foods without selecting times and power levels. The sensor detects
the heat and humidity generated by the food and cooks your food automatically.
Place food into an appropriate sized dish for the volume of food you are cooking. Cover securely with plastic
wrap or a securely
fi
tting lid (do not use any snap closing lids). Plastic dishes are not suitable as a secure
seal cannot be achieved and inaccurate cooking may result.
1
Touch
Once
The menu appears in the Display Window.
2
Select desired menu
Tapping “+”/“-” or swipe the slider bar until the desired menu appears in the Display Window.
(see below chart).
Menu
Recommended Weight Range
Accessory and
Recommended Container
1. Sensor Reheat
125 - 1000
g
-
2. Vegetables
125 - 500
g
-
3. Frozen vegetables
125 - 1000
g
-
4. Rice
1 - 2.5 cups
-
5. Dried pasta
125 - 500
g
-
6. Fresh pasta
200 - 800
g
-
7. Casserole
800 - 2000
g
-
8. Steam Fish
125 - 500
g
-
9. Steam Frozen Fish
250 - 550
g
-
10. Jacket potato
300 - 1200
g
Glass shelf in middle position
11. Frozen potato products
500 - 1000
g
Glass shelf in higher position
Note
:
If you are satis
fi
ed with the result of the SENSOR Reheat/Cook programme, please skip to step 5.
3
Touch
once
Touch the Set key to verify the selection.
4
Adjust to Taste
Preferences for degree of cooking vary for each individual. After having used auto sensor programs a
few times, you may decide you would prefer your food cooked to a different degree of cooking. By using
“+/-” the programs can be adjusted to cook food for a longer or shorter time. After selecting the sensor
program, tap “+/-’’ or swipe the slider bar before touching Start. The oven will automatically cook the
food 10% more or 10% less.
5
Touch
Once
Do not stop the oven or open the door during this part of the cooking stage as inaccurate cooking may
result. After the heat humidity is detected by the SENSOR, the remaining time appears in the Display
Window and begins to count down.
NOTES:
1. If the temperature of the cavity is high, sensor cook/reheat feature can not be used. Display window will
display "HOT". Sensor Reheat/Cook feature can not be used until the "HOT" disappears.
2. When you select an automatic program symbols will appear in the display to show the cooking mode that
will be used and the accessories that are needed.
MP_F0003BH20QP_00.indb 25
MP_F0003BH20QP_00.indb 25
2013/12/9 11:40:09
2013/12/9 11:40:09