English
English
13
12
3. Position the iron in the heel
rest position and make sure
the temperature selector is
set to "
0
".
4. Plug the power plug into socket-outlet.
5. Set the temperature selector.
The thermostat operating indicator light goes on.
Refer to "Guide for Steam/Dry selector" on P13
• Please make sure the temperature select indicator
setting is on "
MAX
" when using "
high steam
" and
"
power shot
".
Note:
If the temperature of soleplate is high, the light does not
go on.
6. Wait until the thermostat operating indicator light goes
off. Hold the iron horizontally and move the steam/dry
selector into the dry position when using the
"
power shot
".
7. After each use
Set the temperature selector
to "
0
" and unplug.
Set the steam/dry selector to the
dry position. If the steam/dry selector
is not in the dry position after using,
remaining water will move into the
soleplate and can result in burns when
the iron is used next time.
Empty the water reservoir immediately
after using. Do not store the iron
with water in it. If you empty the
water reservoir after it has cooled,
heat the iron for about 5 minutes
with the temperature selector set
to "
MAX
".
• Do not wind the power cord around the iron.
It may be damaged by the hot soleplate.
Wait until the iron has cooled before
storing it, and always set it on the
heel rest to protect the soleplate
from scratches, corrosion or stains.
Steam/Dry
selector
Temperature
zone
Recommendations
Dry
Choose
according to the
type of fabrics.
For polyester and other
V\QWKHWLF¿EHUPDWHULDO
Low
steam
For thin or delicate fabrics
requiring a small amount
of steam.
High
steam
For fabrics requiring a
lot of steam. (i.e. thick
materials, items with
stubborn wrinkles).
Please make sure the temperature select indicator setting is
on "
MAX
" when using "
high steam
".
CAUTION:
Do not aim the steam at any parts of your body or others.
Notes:
• The anti-drip system will activate when the temperature of
the soleplate’s surface drops. The thermostat operating
indicator light will go on and steam will stop. It is normal to
hear clicking sound during this process. Resume usage
only after the thermostat operating indicator light has
WXUQHGRႇ
• Use an ironing board to support the steam iron.
Using the “power shot”
The " power shot " feature provides extra steam which goes
deep into the garment and is helpful for removing stubborn
wrinkles. It is necessary to clean the inside of the iron before
using the "power shot" feature, if you have not used the
“power shot” feature for a prolonged period. Simply test the
“power shot” feature several times away from the ironing
board and clothes to be ironed. This will prevent brown
spotting or water spotting on the clothes.
Set the steam/dry selector to the dry position.
Set the temperature selector to the " MAX " position.
Simply pump the power shot button
• Pump the power shot button several times at the beginning
of each ironing session.
• Press the power shot button in intervals of at least 2 seconds
during the use to prevent water spotting.
• If the power shot weakens, wait until the thermostat
operating indicator light goes on, and then off.
• Use a press cloth if necessary.
Guide for Steam/Dry selector
steam zone
NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb 8
2022/4/29 11:05:02
