background image

English

English

English

07

06

 

WARNING

This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance by a person 

responsible for their safety. Children should be 

supervised to ensure that they do not play with 

the appliance.

 -Failure to do so may cause an accident or injury.

Immediately stop using and remove the power 

plug if there is an abnormality or malfunction.

-  Using it in such conditions may cause fire, 

electric shock, or injury.

<Abnormality or malfunction cases>

• The power cord is damaged (like it cracks, or 

the core wire is exposed).

• The main body, power cord or power plug is 

abnormally hot, deformed or discolored.

• The product cannot power on occasionally 

after the power cord is moved.

• The power plug or power cord smells of 

burning.

 -Immediately request inspection or repair at an 

authorized service center.

If the power cord is damaged, it must be 

replaced by the manufacturer, its service center, 

or similarly qualified persons in order to avoid a 

hazard.

 -Failure to do so may cause an accident or injury.

The iron must be used and rested on a flat, 

stable surface. When placing the iron on its heel 

rest, ensure that the surface on which the heel 

rest is placed is stable.

 -If placed on a shaggy rug or other unstable 

location, the iron may fall over and cause damage 

to the rug, injury or burns.

 

CAUTION

Do not insert pins or needles into the iron or use 

the product on clothes with sewing needles or 

the like inserted.

 -Doing so may cause electric shock or injury.

Do not put the soleplate too close to you or 

others since steam may unexpectedly erupt 

from it.

 -Doing so may cause scalds or injury.

Do not use the product with the exception of 

fabric.

 -Failure to do so may cause damage it.

Do not store the product until it has fully cooled 

down.

 -Doing so may cause scalds.

Do not store the product while the power cord is 

twisted.

 -Doing so may cause breakage to the wire of the 

power cord, and may result in scalds, electric 

shock or fire due to a short circuit.

Do not add perfume, vinegar, starch, descaling 

agents, ironing aids or other chemicals in 

the water reservoir. Please only use room-

temperature pure water or distilled water in this 

product.

 -Otherwise the clothes may be stained or 

discolored.

Do not use any ironing accessories available on 

the market.

 -Doing so may cause burns or damage to cloth due 

to incorrect operation.

Do not use the product near walls or furniture 

that cannot withstand high temperature or 

humidity.

 -Doing so may damage the wall or furniture.

Do not use steam when wearing gloves through 

which steam can penetrate.

 -Doing so may cause scalds.

Do not add hot water in the water reservoir.

 -Doing so may cause burns due to hot water 

  splashes.

If the shot intensity is low, do not operate the 

power shot button.

- Doing so may cause burns due to hot water leaks.

NI-S630,S530,S430 [i8200Q-oS43A]_说明书_EN,VN,AR.indb   5

2022/4/29   11:04:59

Summary of Contents for NI-S430

















Reviews: