- 11 -
INSTRUCTION
DIGITAL DISPLAY WINDOW
PAD
Follow steps 1 to 3 on page 10.
1
4
Press Power Level Selector pad four times.
☛
The selected power level will be indicated and 2nd Stage Heating
Indicator “2” will start to blink.
1
2
5
Set the desired heating time for the second stage using the Timer Dial.
☛
The set heating time will appear.
Note:
up to 15 min. on
or
, 60 min. on
,
or
1
2
6
Press Start pad.
☛
The oven lamp will turn on. The total time for both stages will appear
and start to count down. 1st Stage Heating Indicator “1” and Power
Level Indicator for the first stage heating will start to blink.
1
2
• After the first stage heating, a single beep tone will sound. 2nd Heating Stage Indicator
“2” and Power Level Indicator for the second stage heating will start to blink and the
remaining heating time will count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on. Digital Display Window
will show the originally set time and power.
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
go blank.
2
Note
: For 3 stages Heating, repeat steps 4 and 5 above before pressing Start pad
.
SPECIAL NOTE: For both single and 2 or 3 stages heating
1. While heating, one press on Stop/Reset pad stops the operation. You can restart it by pressing Start pad or a
second press on Stop/Reset pad will cancel the selected program.
2. While not heating, one press on Stop/Reset pad cancels the selected program.
Repeat Feature
• You can repeat the last manually selected heating time by pressing the Start pad
, if the oven is used
within 1 minute.
• The Repeat Feature will be cancelled after 1 minute of non-use. The display goes blank.
Example: To cook food at HIGH power for 2 minutes and at DEFROST power for 1 minute
◆
2 or 3 stages heating
1
2
How to Operate NE - 3280/NE - 2180/NE - 1880
