- 9 -
How to Operate
Programming
— DO NOT OPEN THE DOOR —
The display window MUST be blank before programming. If any indicator light is illuminated in the digital display
window: close the door, press the
Stop/Reset
Pad and wait 1 minute until the display goes blank.
A. Programming Memory Pads for Single Stage Heating:
Example: To program 30 seconds at MED (medium power) for Memory Pad 5
1.
• Press the
Program
Pad.
Note:
• If no “PROG” Indicator appeared on
display, “Program Lock” should be
cancelled. (See page 11)
2.
• Press the Memory Pad
5
. The pad number
and the previously selected time and
power level will appear in the display.
• The pad number and Stage Heating
Indicator will appear in the display again.
3.
• Press the
Power Level
Pad twice. The
Memory Pad number will go out.
4.
• Press Memory Pads
3
and
0
.
5.
• Press the
Program
Pad again. You have
completed programming the selected
Memory Pad for single stage heating.
Double heating time for multiple portion
heating was automatically set.
• 2 seconds later, the time and power level
setting you programmed will appear in the
display.
• 2 seconds later, Double Quantity Heating
Indicator and then the double heating time
will appear in the display.
• 2 seconds later, the display will go blank.
The Memory Pad
5
is now programmed
for heating - 30 seconds at MED (medium
power).
NOTE:
• Program the remaining Memory Pads as desired by repeating steps 1 - 5. You may insert up to 10
memory programs.
• When the Program indicator “PROG” is blinking, the program can be cancelled and/or the pad number
erased by pressing the
Stop/Reset
Pad.
F0003BS90QP_Eng_00_20150722.indd Sec1:9
F0003BS90QP_Eng_00_20150722.indd Sec1:9
2015/7/22 9:46:00
2015/7/22 9:46:00
