Panasonic NE-1037 Operating Instructions Manual Download Page 9

Page: 9 / 22

- 7 -

How to Operate

Heating

Open the door and place food in the oven cavity. Close the door.

“0” must be showing in the display window.

A. Manual Single Stage Heating:

This feature gives the user maximum

exibility to set the oven to desired heating time and power level.

This is ideal for menus that require various heating requirements.

Example: To heat for 2 minutes at HI (high power)

• Press the

Power Level

Pad once.

• Press the Memory Pads

and

• Press the

Start

Pad.

Heating will start. The time on digital
display will count down.

Beep tone will sound.

(See page 13)

• All heating will stop. When opening the

door, the display will stop blinking.

B. Manual 2 or 3 Stages Heating:

This feature allows you to set to begin heating at one power level then shift automatically to a different power
level after the designated length of heating time.

Example: To heat for 2 minutes at DEF (defrost) for 2nd stage heating

For Stage 1 cooking

• Follow steps 1 and 2 above table.

For Stage 2 cooking

• Press the

Power Level

Pad 3 times.

Indicator will change each time the pad
is pressed. “DEF” is now displayed. The
stage “2” is blinking.

• Press the Memory Pad

and

• Press the

Start

Pad.

The total time for both stages will be
displayed. The stage “1” and the power
level “HI” blink. The oven lamp will be
turned on. Heating will start.

• The total time will be displayed and count

down.

• When oven shifts to the next stage, a

single beep tone will sound. The stage “2”
and the power level “DEF” blink.

Beep tone will sound.

(See page 13)

• All heating will stop.

When opening the door, the display will
stop blinking.

NOTE:

For 3 stages heating, select a power level again and set the cooking time.

SPECIAL NOTE: For both single and 2 or 3 stages heating.

1. While heating, one touch on the

Stop/Reset

Pad stops the oven. You can restart by pressing the

Start

Pad or

a second touch on the

Stop/Reset

Pad will cancel the selected program.

2. One touch on the

Stop/Reset

Pad, before the heating cycle is started, will cancel the selected program.

F0003BS90QP_Eng_00_20150722.indd Sec1:7

2015/7/22 9:46:00

Summary of Contents for NE-1037























Search results

Summary of Contents for NE-1037

Reviews:

Related manuals for NE-1037

Brands by name

Popular brands

Panasonic NE-1037, Operating Instructions Manual

Search results

Summary of Contents for NE-1037

Reviews:

Related manuals for NE-1037

Brands by name

Popular brands