EN14
English
If...
Possible cause
How to fix
See
page
Energy saving function
Temperature of hot
water is low.
z
The keep-warm temperature will
drop when the energy saving
function by turning off the heater.
(It drops to a minimum of 60 ºC.)
z
Reboil again.
Light on
EN7
The temperature
indication goes up and
down itself.
z
When the dispensing time is getting close, it starts boiling
automatically.
z
When the time is changed to use the hot water, the unit update
the new time and it makes boiling time change. (The boiling time
is updated based on the new memory.)
EN9
The energy saving
function is not
activated or canceled.
z
When the unit is plugged in initial use, this function is not
activating without having memory.
z
Over 10 hours later after unplug, memory will lose.
—
The unit start boiling
suddenly.
z
Is the energy saving function set?
z
Release the energy saving
function.
EN9
The unit looks like
power is off.
The healthy tea function is
canceled.
z
When
is flashing, other button
is pressed.
z
When
lights on, water is
added.
z
Press
button.
EN9
Lamp flashes while buzzer
sounds
(Power supply stops)
pi pi pi pi
Flashes alternatively
Overheating protection
z
To prevent overheating, this is
activated when it boils without
water.
y
Is water filled higher than
minimum water level mark?
y
Is the lid left opened when
water is filled ?
z
Fill the water higher than
minimum water level
mark, close the lid and
press
.
—
z
It may light on:
y
when hot water is filled.
y
depending on method of filling
water.
y
Is citric acid settled at the
bottom of inner container while
citric acid washing ?
z
Press
.
—
z
Once disconnect the
power plug, mix with
chopsticks and wash after
citric acid is distributed.
EN12
Boiling without water will cause odor and change the color of fluorine resin.
Summary of Contents for NC-SSA400
Page 67: ......
