![background image](http://html.mh-extra.com/html/panasonic/nc-df1/nc-df1_operating-instructions-manual_262051015.webp)
15
English
3
Fill water in the water tank,
then plug in and turn on the
power switch.
4
After brewing is completed, turn off
the switch and remove the jug.
Power indicator lights while the switch is on.
•
Note
Do not fill the water tank with hot water.
•
(A lot of steam may spurt out.)
Do not brew coffee when the water is below 2
•
or more than the maximum 8 on the scale.
Do not add water while brewing.
•
When water is added more than you desire,
•
please remove it by using another container.
To brew coffee consecutively
Repeat step 1~3.
Wait for 5 minutes to add water in the water
•
tank.
(
If water is added too soon, steam may spurt
out.
Note
Do not pull out the basket when jug is set on the plate.
•
(Coffee will drip.)
Coffee is hot, remove the jug slowly.
•
(Hot coffee may spill out.)
When the jug is removed immediately after brewing,
•
coffee may drip. In that case, please wait to remove the
jug for a while after brewing.
When handling the jug with hot coffee in, do not open the
•
jug lid. Hot liquid may spurt out or drop on your hand. (It
may cause burns.)
When removing the jug, pull it in line with the handle.
•
To keep the coffee warm, leave the power switch in the
•
on position. The appliance switch off automatically after
30 minutes from the power switch is turned on.
After use
Unplug the coffee maker after use.
•
When you have remaining water in the water tank
Turn on the coffee maker and extract water completely
•
into the jug, then throw it away.
)
NC-DF1(CZ45E154).indb 15
2016/07/04 12:53:20